Manual BB5 Unlock By Dejan

BB5 BY DEJAN UNLOCK PROCEDURE

SHORT Instructions:

1. Connect
DKU-5 or normal COM cable to computer

2. Set proper
COM cable (must be, between 1 and 9)

3. Download
unlocker, run `install.bat`

4. Open file
c:/bb5_unlocker/logs/bb5_unlocker.cfg and write here proper COM port (1-9)

5. Run c:/bb5
unlocker/BB5logunlocker.exe

6. Click READ
PHONE

7. Click MAKE
LOG, log will be created

8. Enter
codes to phone (in /psw/ dir), or

9. Click SP
UNLOCK to enter codes via FBUS

EXTENDED INSTRUCTIONS:

*******
CONECTION ******

For this
program you need Fbus cable like DK5, CA43 or similar conected to ports from
COM1 to

COM9.

First unpack
zip fiole and strat install.bat

In file
"c:\bb5_unlocker\logs\bb5_unlocker.cfg" with any text editor change your COM
port setings!

******* USING
********

Program can
be started successfully only if is COM port in file

"c:\bb5_unlocker\logs\bb5_unlocker.cfg" adjusted properly.

READ PHONE:

***********

Reading info
data from phone and making BACKUP file for that phone( Field 308,1).

IMPORTANT DO
NOT delete or modify that file because can save your *** if something goes

wrong.

WR BACKUP:

***********

With that
function can write backup file with Field 308,1 if exist in BACKUP folder.

MAKE LOG:

***********

Function for
making log file . With that log file BB5_calc.exe calculating codes for unlock.

Working with
BB5 phones with RAP3G v.2.x (6630,6680,6681,6682,n70,n90).

IMPORTANT
phone must be without Sim card.

SP UNLOCK:

***********

Making unlock
with codes calculated by BB5_calc.exe.

SP UNLOCK
PROCEDURE

Connect cable
to PC and be shure com port is adjusted properly

Start
BB5logunlocker.exe

Connect phone
and switch on without Sim card.

press button
READ PHONE and wait until get the message DONE.

If is
everything correct you will see info from phone on screen.

Pres button
make log and wait until get mesage done.

Log file is
in folder LOGS.

Start
BB5_calc.exe to make for you PSW file in folder PSW

Press button
SP UNLOCK and unlock your phone.

That is all
folks

If you got
unlock codes from your provider and you used all yours 3 attempts

to enter code
via keypad then do the following:

into dir
"c:\bb5_unlocker\psw" create a file "aaaaaaaaaaaaaaa_BB5.psw" where is

"aaaaaaaaaaaaaaa"
enter your phones imei

then in that
created file enter in the files start "#pw+bbbbbbbbbbbbbbb+c#" where is

"bbbbbbbbbbbbbbb"

enter your
unlock code and where is "c" enter your logs level number (1-7).

save the file
and use "SP UNLOCK" function

Thanks For Dejan

 

Admin

Endro Prasiswo
tel.:081334169022
fax:03423326622
Email:admin@kesamben.co.cc
URL:http://www.obralilmu.co.cc
Facebook:http://www.facebook.com/endro.prasiswo

Silahkan dibaca juga kelanjutannya dibawah ini